Carbox YourSize Universal High Sided Boot Liner Protector

The Carbox YourSize is a universal liner offering differing lengths and widths to suit virtually any vehicle. They are supplied with a free Anti-Slip Bumper Protector that clips onto the Carbox.

Important Note: Please see below for advice on how to select the liner you need. The size defaulted when visiting this page will be random and will not be a selected size for your vehicle. Boot areas vary hugely as a result of vehicle options, variable floor heights and rear seat positions. Therefore we are unable to recommend the specific size for your vehicle.

They can be fitted either behind the rear seats or sliding over the folded rear seats depending on your needs. With straight sides it is easy to slide in and out of your vehicle. The opening at the boot opening/tailgate end is lower at 10cms high to enable easy loading and unloading.

The liners are made from a highly durable material and because of the high side walls soil, dirt or wet dogs stay in the Carbox liner protecting the interior of your vehicle. They are virtually indestructible and lightweight despite its high stability.

How to select the appropriate size:

• Step 1: There are four widths to chose from and you need to measure the narrowest point of your boot at 33cm high (the top height of the liner).
• Step 2: Measure the narrowest point on the boot floor level taking into account any wheel arch protrusions etc. If this is more than 6cm less than the height in step 1 you need to select the smaller width liner.
• For example, a 106cm liner has a base of 100cm. This is because the opening at the boot opening/tailgate end is narrower and lower at 10cm high matching most boot/tailgate openings, enabling easy loading/unloading.
• Step 3: Now measure the length you need taking into the seats up or down. If the seats are up then measure at a vertical height of 33cms from the boot floor to the back of the seat. This is because the seats will be at an angle and the length will then be shorter at boot opening/tailgate end.

Further advice:

• It’s very easy to over measure – do make sure you are taking into account the narrowest width and the right length taking into account the seat angle and the boot opening/tailgate. The liner needs to be fully inside the boot and not overlap the boot opening/tailgate.
• These liners are incredibly robust. They cannot be compressed so always go down a size, not up.
• Unfortunately we have to charge a £25 handling fee if the wrong liner is purchased and needs to be returned/swapped for another size.
• If in any doubt please get in touch and we will be happy to help.